Filter
Top Products
17
Operation (Continued)
Box Size Set-Up
1. ADJUST DRIVE BELTS (Figure 3-2)
Place a product filled box on infeed end of
machine bed with top flaps folded as shown and
manually move box forward to contact lower
taping head applying roller.
Turn drive belt adjustment crank to position both
side drive belts against sides of box.
2. ADJUST UPPER TAPING HEAD (Figure 3-3)
Turn height adjustment crank to position upper
taping head onto box. Turn clockwise to lower
head, counterclockwise to raise head. Upper
taping head must contact and hold top box flaps
closed.
Figure 3-2 – Side Drive Belts
Figure 3-3 – Upper Taping Head