Filter
Top Products
37
Replacement Parts Illustrations and Parts List
800a3 Adjustable Case Sealer, Type 39600
With AccuGlide™ II STD (2 Inch) Taping Heads
1. Refer to first illustration, 800a3 Assembly, for the Figure Number that identifies a specific portion of the
machine.
2. Refer to the Figure or Figures to determine the individual parts required and the part reference number.
3. The parts list that follows each illustration, includes the part number and part description for the parts in that
illustration.
Note – The complete description has been included for standard fasteners and some commercially
available components. This has been done to allow obtaining these standard parts locally should the
customer elect to do so.
4. Refer to the first page of this instruction manual for replacement parts ordering information.
IMPORTANT – Not all the parts listed are normally stocked items. Some parts or assemblies
shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confirm
item availability.