Filter
Top Products
22
Operation (Continued)
Figure 3-9 – Box Size Set-Up
Figure 3-10 – Box Size Set-Up
Figure 3-9
Place box at infeed end of machine and push into
machine until it is taken away by drive belts.
Figure 3-10
Adjust compression rollers. Run box through
machine and stop when adjacent to compression
rollers. Move compression rollers in to press box top
flaps firmly together. Restart machine to exit box.
• To reduce the risk associated with pinch,
entanglement, and impact hazards:
− Keep away from moving belts and
pneumatically controlled kicker
WARNING
• To reduce the risk associated with pinch,
entanglement, and impact hazards:
− Keep hands clear of the upper head support
assembly as boxes are transported through
the machine
− Keep hands, hair, loose clothing, and jewelry
away from moving belts and taping heads
CAUTION
• To reduce the risk associated with
mechanical and electrical hazards:
− Turn electrical and air supply off and
disconnect before performing any
adjustments, maintenance or servicing the
machine or taping heads
WARNING
• To reduce the risk associated with pinch
hazards:
− Keep hands, hair, loose clothing, and jewelry
away from box compression rollers when box
is passing through machine
CAUTION