Filter
Top Products
Creating Distributed Key Policies
210 EncrypTight User Guide
To delete an existing policy:
1 From the Policy view, right-click the desired policy name and click Remove element.
2Click OK on the Permanently Delete an Element window.
In addition to deleting specific policies, you can delete all of the policies on the ETEP. This can be useful
in troubleshooting situations or if you need to relocate the ETEP. Clearing all policies from the ETEP
restores the default policy to send all traffic in the clear.
To delete all policies:
1 In the Appliance Manager, select the ETEP.
2 Select Tools > Clear Policies.
NOTE
You can also log into the CLI for the ETEP and use the clear-policies command to remove all
policies. For more information, see “Placing PEPs in Bypass Mode” on page 246 and the ETEP CLI User
Guide.