Filter
Top Products
11
ASSEMBLING THE MIXER
Before using your Breville Wizz
®
Planetary
Mixer for the first time, remove any
packaging material and promotional labels.
Ensure the speed control dial is in the
‘Off’ position, the mixer is switched off at
the power outlet and the power cord is
unplugged.
Remove the mixing bowl, beater, whisk
and dough hook and wash in warm soapy
water with a soft cloth. Rinse and dry
thoroughly. The bowl and the attachments
may be washed in the dishwasher.
NOTE: When first using your Breville
Wizz
®
Planetary Mixer, you may notice
an odour coming from the motor. This is
normal and will dissipate with use.
ATTACHING THE BOWL
1. Place the mixer base on a level, dry
surface such as a bench top. The
mixer motor head should be in the
horizontal (closed) position. Raise the
mixer motor head by depressing the tilt
back hinge button.
2. Lift the mixer motor head up until it tilts
back and locks into the open position.
3. Insert the mixing bowl into the bowl
locking recess of the mixer stand and
turn clockwise until the bowl locks
securely into place.
NOTE: To remove or insert the mixing
bowl, the mixer motor head must be
raised and locked into the open position.
ATTACHING THE SCRAPER BEATER
TO THE MIXER MOTOR HEAD
1. Ensure the mixer motor head is in
the raised/open position. Align the
groove in the top of the Scraper Beater
with the locking pin on the spindle
extending down from the mixer
motor head.
2. Push the scraper beater upwards
and turn clockwise until it locks
securely onto the locking pin on the
spindle (see Fig. 1).
ASSEMBLY AND OPERATION OF YOUR WIZZ
®
PLANETARY MIXER
BEM800_IB_Issue_0110.indd 11 10/12/09 10:00 AM