Breville BEM800 Mixer User Manual


 
14
THE COUNT-DOWN TIMER
The count-down timer is especially useful
for any recipe that specifies the length
of time ingredients should be mixed. For
example, if a recipe reads, “beat for 3
minutes,” you can set the count-down
timer to 3 minutes by pressing the up/down
arrows. After 3 minutes of mixing, an alarm
will sound and the motor will automatically
turn off. The count-down timer will flash
“OFF”. The control dial must to be rotated
to the “Off” position to reset the timer and
to continue mixing.
To set the count down timer, press the up
or down arrows until the desired mixing
time is displayed on the LCD screen.
NOTE: Press and hold the arrows down
to scroll through the timer setting
more quickly.
Rotate the dial clockwise to select the
desired speed and to begin mixing. When
the timer has finished counting down,
“0:00” will flash on the LCD screen and a
beep will sound to notify you that the time
has expired. The mixer will automatically
turn the motor off. The control dial must be
rotated to the 'OFF' position to reset the
timer and to continue mixing.
NOTE: The maximum time displayed on
the timer is 9:59 (nine minutes, fifty-nine
seconds). The mixer will automatically
switch Off at 9 minutes 59 seconds. The
control dial needs to be rotated to the
“Off” position to reset the timer and to
continue mixing.
PAUSE MODE
While mixing, at any stage, you can rotate
the control dial to the “pause” setting.
This will turn the motor off and “pause”
the timer. This enables you to assess
the mixing progress or add additional
ingredients without effecting the timer.
For example, if you are mixing using the
‘count-up timer’ mode, you can rotate the
control dial from one of the mixing speeds
to “pause”. The mixer motor will stop and
the timer will “pause”. Once ready, you can
rotate the dial back to one of the mixing
speeds, the timer will continue to count-
up from the exact time it was paused.
Alternatively, if you have turned the mixer
to “pause” you can then reset the timer to
0:00 by rotating the dial to “Off” position.
If using the “pause” function in ‘count-
down timer’ mode, you can suspend the
timer at any stage during the count-down
process by rotating the control dial to the
“pause” setting. To continue mixing in the
‘count-down timer’ mode, simply rotate the
dial back into one of the mixing speeds or
alternatively to the “Off” position to reset
the timer to 0:00.
THERMO CUT-OFF – TEMPERATURE
OVERLOAD
The mixer is equipped with a self-resetting
safety device which safeguards against
overheating the motor with excessive
loads. If overheating occurs, the mixer
will automatically activate the overheating
protection device and the motor will switch
ASSEMBLY AND OPERATION OF YOUR WIZZ
®
PLANETARY MIXER continued
BEM800_IB_Issue_0110.indd 14 10/12/09 10:00 AM