Filter
Top Products
13
1. Ensure the speed control dial is set to
the ‘Off’ position, plug the cord into a
220-240v power outlet and switch the
power ‘ON’ at the power outlet. The
illuminated LED speed indicator band
will flash and the Count Up/Down timer
will display “0:00.” The mixer is now
ready to be used.
NOTE: If the mixer has not been used
for 3 minutes it will automatically go to
a power saving “stand by mode.” The
mixer can be left in stand by until the
ingredients in the bowl are ready to be
mixed. To exit stand by and begin
mixing, turn the dial to the selected
speed or press one of the ‘Count Up/
Down timer buttons.
2. Add ingredients to the mixing bowl as
indicated in the recipe.
Always begin mixing by selecting a low
speed setting on the speed control dial.
This will prevent ingredients splattering.
Increase the speed as suited to the
mixing task. The speed setting can be
adjusted during operation by moving
the dial clockwise for the main mixing
settings. Use the mixing guide in this
booklet as a reference.
If necessary, stop the mixer during
operation and scrape any food mixture
down the sides of the mixing bowl with
a spatula.
NOTE: Always turn the Breville Wizz®
Planetary Mixer off if you need to scrape
the bowl during use, and then switch
back on and continue mixing.
THE COUNT-UP TIMER
The count-up timer is especially useful to
gauge mixing time or when recipe does
not specify the mixing time. You can
monitor the time it takes to thoroughly mix
the ingredients, so that the next time you
mix the same ingredients you can set the
count-down timer for the specific time.
The count-up timer will automatically
begin counting up as soon as the dial is
rotated from ‘Off’ to one of the speeds.
When the dial is turned to "Pause" the total
time will be displayed on the LCD and will
flash. When the dial is turned to "OFF", the
LCD display will reset back to "0:00".
ASSEMBLY AND OPERATION OF YOUR WIZZ
®
PLANETARY MIXER continued
BEM800_IB_Issue_0110.indd 13 10/12/09 10:00 AM