Filter
Top Products
9
Assembling your Breville ikon™ Food Processor continued
Step 4
Place the processing lid onto the processing
bowl so the food chute is slightly right of the
bowl handle. Holding the handle of the bowl
and the food chute at the same time, turn the
lid clockwise to align it with the ‘lock’ symbol
on the bowl handle. The ‘locking tab’ on the
lid will slot into the ‘interlocking safety catch’
on the handle. The lid should be now securely
locked into position.
The ikon™ Food Processor will not operate
unless both the processing bowl and lid are
correctly locked into position.
Your Breville ikon™ Food Processor is
equipped with a silicon seal, located in a
recess around the outer rim of the food
processor bowl lid, to reduce leakage
while processing larger volumes of wet
ingredients. The silicon seal is removable
for cleaning purposes (refer to Cleaning and
Care page 25).
Step 5
Insert the power plug into a 230/240 volt
power outlet and switch the power outlet on.
The red power light illuminates. Your ikon™
Food Processor has ON, OFF and PULSE
buttons to give total control when processing
food. Press the ON button to switch the
motor on and operate continuously. Press
the OFF button to switch the motor off. When
short bursts of power are required, press the
PULSE button and hold down briefly, release,
then press again. The PULSE action will
automatically stop when the button is released.
Step 6
After processing, always wait until the
blades or discs have stopped spinning before
unlocking and removing the lid. To remove
the processing lid, ensure the OFF button has
been pressed, the power is switched off at
the power outlet and the cord is unplugged
from the power outlet. Holding the handle of
the bowl and the food chute at the same time,
turn the lid anti-clockwise (as indicated by the
symbol) and lift off.
As a safety feature, the food processor
will automatically switch off when the lid
is unlocked, however, it is good practice
to manually switch off the food processor
using the OFF button before removing the
lid.
Step 7
Remove the processing bowl (before removing
blade or discs) by turning it anti-clockwise until
the handle is in line with the ‘unlock’ symbol.
Lift the bowl off the attachment spindle.
CAUTION: THE QUAD
®
PROCESSING BLADE AND DISCS ARE EXTREMELY SHARP, HANDLE
WITH CARE AT ALL TIMES.
BFP650_IB_FA.indd 9 17/4/09 3:27:25 PM