Filter
Top Products
7
MARINE LOCK
Use a small nylon bristle brush to remove food
and debris from pivot point. If lock is still sticking
have maintenance disassemble and clean pieces
individually and reassemble.
Disassembly
1. Disconnect power from kettle.
2. Remove console cover from top of kettle's
console.
3. Remove locknut and lockwasher from inside
console.
4. Remove shoulder bold from latch.
5. Clean all parts.
Re-Assembly
6. Apply locktight to
shoulderbolt where
illustrated. Replace
shoulder bolt and latch
and tighten firmly.
7. Replace lockwasher and locknut inside the
console and tighten firmly.
8. Test Marine Lock. See Marine Lock Testing
Procedure (page 19).
9. Replace console cover.
Latch
Shoulder Bolt
Carefully apply
locktight to the
final two threads.
Lockwasher
Locknut
Job Cleaning Agent Comments
Routine Cleaning Soap, Ammonia Apply with cloth or
Detergent, Medallion sponge
Fingerprints Arcal 20, Lac-O-Nu Provides barrier film
& Smears Ecoshine
Stubborn Stains Cameo, Talc, Zud Rub in direction
& Discolouration First Impression of polish lines
Grease & Fatty Acids, Easy-Off, De-Grease It Excellent removal
Blood, Burnt-On Foods Oven Aid on all finishes
Grease & Oil Any good commercial Apply with sponge
detergent or cloth
Restoration/ Benefit, Super Sheen
Passivation
RECOMMENDED CLEANERS
FOR SPECIFIC SITUATIONS