Filter
Top Products
19
Installation Instructions
Stack Burner Installation
Burner
Head
Crown Burner
Stack Burner
Spill Tray
Burner
Ring
Ridge on
bottom of
burner cap
STEP 1: Put burner ring
on top of head.
STEP 2: Turn ring until
it drops into place. Twist
back and forth to assure
proper seating.
STEP 3: Install burner
caps. Ridge on cap must
surround top of ring.
Burner Head
Crown Burner Installation
Burner Base
Burner Ring
Ridge on
bottom of
burner cap
STEP 1: Install
burner head. Put
locating tab in
keyed hole.
STEP 2: Install
burner ring. Line up
ring tabs with head
slots. Twist back
and forth to assure
proper seating.
STEP 3: Install burner
cap. Ridge on cap must
surround top of ring.
Keyed
Hole
Installing the Burner Components
WARNING
Never attempt to operate the cooktop section of the range with
any of the burner rings, burner caps or grates removed.
Remove the burner rings, burner caps and grates from their
shipping packages.
Install the burners as shown.
Gently set the grates on top of the spill tray. Put the legs of
each grate inside the corresponding dimples.
•
•
•