Filter
Top Products
Replacing the Display Cable
1. Follow the instructions in Before You Begin.
2. Connect the display cable to the display-board connector and secure it with the tape.
3. Replace the display panel (see Replacing the Display Panel).
4. Replace the display bezel (see Replacing the Display Bezel).
5. Replace the display assembly (see Replacing the Display Assembly).
Display-Panel Brackets
Removing the Display-Panel Brackets
1. Follow the instructions in Before You Begin.
2. Remove the display assembly (see Removing the Display Assembly).
3. Remove the display bezel (see Removing the Display Bezel).
4. Remove the display panel (see Removing the Display Panel).
5. Remove the four screws (two on each side) that secure the display-panel brackets to the display panel.
1
display cable
2
tape
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.