Filter
Top Products
Back to Contents Page
Hinge Cover
Dell™Inspiron™N5110ServiceManual
Removing the Hinge Cover
Replacing the Hinge Cover
Removing the Hinge Cover
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the display assembly (see Removing the Display Assembly).
4. Remove the four screws that secure the hinge cover to the computer base.
5. Push the three tabs that secure the hinge cover to the computer base.
6. Lift the hinge cover off the computer base.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
screws (4)
2
tabs (7)
1
Hinge Cover