Filter
Top Products
Back to Contents Page
Optical Drive
Dell™Inspiron™N5110ServiceManual
Removing the Optical Drive
Replacing the Optical Drive
Removing the Optical Drive
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the module cover (see Removing the Module Cover).
4. Using a plastic scribe, push the optical drive bracket to slide the optical- drive assembly out.
5. Slide the optical-drive assembly out of the optical-drive bay.
Replacing the Optical Drive
1. Follow the instructions in Before You Begin.
2. Slide the optical-drive assembly into the optical-drive bay until it is fully seated.
3. Replace the module cover (see Replacing the Module Cover).
4. Replace the battery (see Replacing the Battery).
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
optical-drive assembly
2
plastic scribe
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.