Filter
Top Products
10
®
6. To clean the pressure regulator filter,
turn the lid upside down, grasp the
metal filter, located in the center of
the lid (see figures to the right) and
pull up. Clean the filter with warm
soapy water using a small brush to
remove any food particles. Replace
the filter by positioning it back onto
the metal clips, and snapping it back
in place.
7. In order to maintain good
performance of your pressure
cooker, the bottom of the removable
cooking pot, in the area of the sensor pad, must be cleaned
after each use. Wipe with a soft damp cloth and be sure to dry
thoroughly.
8. Never use abrasive cleaners or scouring pads to clean any of
the parts.
Cleaning the Pressure Regular Knob
Check that the pressure regulator knob and the pressure safety
valves are in good working order before each use.
1. After the unit has cooled, remove the lid.
2. Press down and turn the pressure regulator knob counter
clockwise past the EXHAUST setting and carefully lift the knob
up to remove.
3. Using a brush, check and remove any food or foreign particles
that may be lodged in the floating valve.
4. Replace the pressure regulator knob by lining the notches up to
the inside wall of the pressure regulator chamber in the lid and
turn clockwise.
Cleaning/Maintenance
Do not wash any parts of the pressure cooker in the dishwasher.
Always wash the pressure cooker thoroughly after every use, or if it
has not been used for an extended period of time.
1. Unplug and let the unit cool before
cleaning.
2. Wash the removable cooking pot with
warm soapy water. Rinse and dry
thoroughly.
3. Wipe the outer housing with a clean
damp cloth. Do not submerge in
water.
4. Turn the lid upside down, grasp the
rubber gasket on either side and pull
up. Replace the pressure regulator
knob by placing it back onto the
metal fitting and rotating the knob
until it drops into place. Clean the
rubber gasket in warm soapy water.
Rinse and dry thoroughly. Replace the gasket by pushing it
down inside the edge of the lid. Make sure the groove in the
center of the gasket is positioned around the metal ring on the
inside edge of the lid. Note: If the gasket is not positioned
properly, the unit will not work.
NOTE: The rubber gasket must always be properly positioned on
the underside of the lid. Check periodically to make sure that it is
clean, flexible, and not cracked or torn. (See pg. 4 “Before First
Use”, #3.)
5. If the rubber gasket is damaged, do not use the appliance and
contact the Customer Service department at 1-800-336-4822.