Filter
Top Products
5
Electric Pressure Cooker
Beef Function
Use this setting for pieces of beef. It is preprogrammed for High
Pressure, 6 minutes. This function is adjustable for different types
and sizes of beef up to 35 minutes.
1. Follow instructions on page 4 for Pressure Cooking.
2. Lock the lid in place and turn the regulator knob to AIRTIGHT.
3. Press the “Beef” button. The display will show “0.06” for 6
minutes of cooking time. This is the default setting.
(You can adjust the default setting by pressing the “Beef”
button again until the desired time is reached up to 35
minutes).
4. Press “Start” button to begin. The unit will begin to heat and
come up to pressure. When the pressure level is reached, the
timer will begin to count down.
5. When the cooking is finished, the unit will beep 3 times and
the display will turn off. This indicates the desired cooking
process is complete.
6. Let the pressure drop on its own (natural release) or turn the
pressure knob to EXHAUST (called quick release) until the
pressure is totally reduced down.
Caution: Hot steam or liquid will be ejected if quick release
is used.
NOTE: Press the “Warm/Cancel” button when cooking time is
complete, or to cancel and reset. Otherwise, the pressure cooker
will automatically switch to warm. Unless “Warm/Cancel” button
is pressed and indicator light goes off, the unit will keep food
warm up to 24 hours.
is pressed and indicator light goes off, the unit will keep food
warm up to 24 hours.
WARNING: Do not hold the pressure regulator knob. Hot steam/
liquid will be ejected. Keep hands and face away from steam vents,
use pot holders when removing the inner pot or touching any hot
items, and never force the lid open. The lid will only open once the
pressure is released. Remove the lid by lifting it away from you to
avoid being burned by the steam.
Warm Function
This function reheats or keeps cooked food warm for up to 24 hours.
1. Follow instructions on page 4 for Pressure Cooking (Steps 1-2
only).
2. Place cooked food in removable cooking pot.
3. Place lid on pressure cooker (see figures on page 4).
4. Turn the pressure regulator knob to AIRTIGHT (see figures on
page 4).
5. The
“Warm/Cancel” indicator light will be lit and the display will
read “0.00”. Press “Start.” The unit will come up to 24 hours.
You can cancel this function at any time by pressing the
“Warm/Cancel” button.