Filter
Top Products
36
Care and cleaning
Upon your return
After a short vacation or absence:
Reconnect the water supply and turn on supply valve (see pages 9 – 10).
Monitor water connection for 24 hours and correct leaks if necessary.
Run 10 – 15 glasses of water from the dispenser to flush out the system.
Restart the ice maker by lowering the ice maker arm.
Discard at least the first three ice harvests.
Deactivate Vacation Mode (if activated).
After a long vacation or absence:
Reconnect the water supply and turn on supply valve (see pages 9 – 10).
Plug the refrigerator back in and reset controls (see page 12 or 16).
Wipe the refrigerator out with a clean damp cloth.
Monitor water connection for 24 hours and correct leaks, if necessary.
Run water through the dispenser for at least three minutes with the filter bypass in place, then
install water filter (see page 25).
After installing the water filter, run water through the dispenser continuously for at least two
minutes, or until water runs steady. Initially you may notice a one to two minute delay in water
dispensing as the internal tanks fills.
Restart the ice maker by lowering the ice maker arm.
Discard ice produced within the first 12 hours.