Filter
Top Products
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
I
POSSIBLE CAUSE
OVEN WILL
● The circuit breaker in your house has been tripped, or a fuse has been blown.
NOT WORK
● Oven controls not properly set.
OVEN LIGHT DOES
● Light bulb is loose or defective. Tighten or replace.
NOT WORK
● Button operating oven light is broken. Call for service.
OVEN DOES NOT
● Aluminum foil being used improperly in oven.
COOK PROPERLY
● Oven vent blocked.
OVEN WILL NOT
SELF-CLEAN
OVEN DOOR WILL
NOT OPEN
OVEN NOT CLEAN
AFTER CLEAN CYCLE
“door” APPEARS
ON DISPLAY
“F-” AND A
NUMBER FLASH
ON DISPLAY
“OFF” APPEARS
ON DISPLAY
● Incorrect cookware being used.
● Clock set incorrectly. Review the Oven Control, Clock and Timer section.
● Controls set incorrectly. Review each cooking section.
● Shelf position is incorrect. Check the Roasting and Broiling Guides.
● Temperature is too high to set self-clean operation. Allow the oven to cool, and
reset the controls.
● Probe is in oven. Remove the probe.
● Oven must cool below locking temperature.
●
Oven controls not
set
properly. Review Operating the Self-Cleaning Oven section.
Q
Heavily soiled ovens require
3’/z-
to 4-hour Clean Time.
● Heavy
spillovers
should be cleaned up before starting clean cycle.
● Oven door not closed after self-clean cycle selected.
● Door is still locked and
you
are
trying
to enter an oven cooking operation.
● This is
the
function error code. Press the CLEAWOFF pad. Allow oven to
cool one hour. Place oven back into operation. If function error occurs again,
disconnect
power to the oven and call for service.
● Oven is too hot for Self-Clean.
● Bake or Broil attempted too soon after Self-Clean.
Q
Child Lockout feature turned
on.
If you need more help.. call, toll free:
GE Answer Center”
800.626.2000
consumer information service
37