Display Messages
Programmed information can be
displayed at any time by pressing
the pad of the operation you want
to see. For example, you can
display the current time of day
while the timer is counting down
by pressing the CLOCK pad. Press
the TIMER ON/OFF pad to return
to the timer display.
To check the start time for delayed
If “door” appears on the display,
Bake or Self-Clean, press and hold
LOCK flashes, and the oven
BAKE or CLEAN pad for 3
control beeps, you set the
self-
seconds. The display will show the
clean cycle and did not shut the
bake or
clean
start time for as long
oven door.
as you press the pad. When you
release the pad, the display will
return to the time of day or timer.
INCREASE and DECREASE Pad Speed
You can change the speed of the INCREASE and
DECREASE pads.
While the oven is off and the time of day shows in
❑
A
the display, press and hold the INCREASE and
DECREASE pads and the TIMER ON/OFF pad at the
same time for about 2 or 3 seconds.
A number from 1 to 5 will replace
“0:00”
in the
display. 1 is the slowest and 5 is the fastest. Use the
❑
v
INCREASE or DECREASE pad to change the
number, then press the CLEAWOFF pad to return to the
time of day display.
Child Lockout Feature
Your built-in oven has a provision for locking the
control panel to prevent the oven from being turned
on accidentally.
~
To lock the control panel, press and hold the
INCREASE and DECREASE pad and the STOP
TIME pad at the same time for 2 seconds. The word
“OFF” will appear and then disappear in the display
and the control panel will be locked. During lockout,
the word “OFF” will appear momentarily each time a
cooking function pad is pressed.
To unlock the control panel, repeat the above
procedure. The word “OFF” will appear in the display
and then disappear after two seconds.
9