Filter
Top Products
- 21 -
- 21 -
Setting the fine-tuning
Only change the fine-tuning in exceptional circumstances,
since once you change it, all connected television sets of the
cable system must be adjusted to match it by means of cor-
responding fine-tuning corrections.
• Press the
▶
button.
—> “FINE 0” appears in the display.
• Set the fine-tuning using the buttons.
• Press
◀
to return to the main menu.
Settings for TV stations
• Press the
button
—> The “Automatic picture format conversion” –
“VIDEO-OUT
:
” menu is activated
(chapter 5.4.1.2, page 29).
• Press the button.
—> The “Setting the LNB oscillator frequency” –
“
LNB-FREQ
:” menu is activated.
Setting the LNB oscillator frequency
Set the oscillator frequency of the LNB used in this menu.
• Use
▶
◀
/
to position the cursor under the digit of the
frequency displayed to be set.
• Press to enter the oscillator frequency of the LNB
used.
Bx 4A
f= 10600 MHz
LNB-FREQ:
"
Module Hauptmenü
▶
◀
/