Filter
Top Products
- 4 -
- 4 -
1 Safety regulations
Warning
• Assembly, installation and servicing should be carried out by authorised
electricians.
• Switch off the operating voltage of the system before beginning with assembly
or service work or pull out the mains plug.
• Do not perform installation and service work during thunderstorms.
• Install the system so it will not be able to vibrate…
- in a dust-free, dry environment
-
in such a manner that it is protected from moisture, fumes, splashing water and
dampness
- somewhere protected from direct sunlight
- not within the immediate vicinity of heat sources
- in an ambient temperature of -20 °C to +50 °C.
• Ensure that the head-end station is adequately ventilated.
Do not cover the ventilation slots.
• Beware of short circuits
• No liability is accepted for any damage caused by faulty connections or inap-
propriate handling.
• Observe the relevant standards, regulations and guidelines on the installation and
operation of antenna systems.
• Earth the
SAT receiver in accordance with DIN EN 50083-1 / EN 60728-11
and VDE 0855 (earthed, equipotential bonding rail).
Take action to prevent static discharge when working on the device.
2 General information
2.1 Packing contents
1 cassette HDM 2370 P CI
2 HF cables
1 CD (assembly instructions)
1 Brief assembly instructions