Filter
Top Products
- 8 -
- 8 -
3.2 Installing the F terminals
To comply with the current EMC regulations, it is necessary to connect the
lines leading in and out of the head-end station using F terminals.
When mounting the cassette in an STR 19-8 head-end station which is in-
stalled in a 19" cabinet, make sure the connections leading in and out for
the 19" cabinet are made using F terminals.
• Insert the required number of F terminals in the openings provided in the
head-end station or in the 19
"
cabinet.
—> F terminals are not included in the scope of delivery.
Tighten the nut on the F terminal until the teeth on the lock washer have pen-
etrated the exterior coating and a good connection is made between the
housing and F terminal.
3.3 Connecting the cassette
•
Plug the HF input cables into the HF input sockets “
HF input A
” 2
(channel strip “A”) and “
HF input B
” 1 (channel strip “B”).
•
Connect the head-end station to the mains power supply.
RS 232
Slot for
CA module
Eject button
for CA module
HF input "B"
HF input "A"