Filter
Top Products
- 28 -
- 28 -
5.4.1.1 Adjusting the output levels of the channel strips
In this menu you can set the output levels of the modulators of
the channel strips “A” and “B” to the same value.
• Measure and note down the output level of the channel
strip.
• Save the settings by pressing the
M
button.
• Select the other channel strip
(page 18),
measure and note
down its output level.
• Activate the
“OUTPUT: HF-Level” menu.
• By pressi
ng adjust the higher output level of one chan-
nel strip to the lower output level of the other channel strip
incrementally from “0
” to “
–7” dB.
—>
To return to the “OUTPUT: Modulator:“ main menu,
press the button.
• Press the button.
—> The “Setting the output channel/output frequency” –
“OUTPUT:” menu is activated (page 20).
Bx 4A
Modulator:
OUTPUT:
on
Bx 4A
HF-Level:
OUTPUT:
0
0 … –7 dB
on / off
CCIR 5.5 FM / GB 6.0 FM
Bx 4A
CCIR
NORM:
5.5 FM
Bx 4A
S21
OUTPUT:
Bx 4A
S21 Fine
OUTPUT:
0
–64 … +63
▶
▶
C
CIR 5.5 FM / GB 6.0 F
M
Bx 4A
CC
IR
NORM
:
5.5 FM
Bx 4A
S21 Fin
e
OUTPUT
:
0
–
64 … +6
3
▶
▶