Filter
Top Products
- 22 -
- 22 -
• Press the button.
—> The “Setting the input symbol rate” –
“INPUT: ”and e.g. “SR=27500” menu is activated.
Setting the input symbol rate
The symbol rates of the satellite transponders can be found in
the current channel table of the satellite operator, in various
satellite magazines and in the Internet.
• Use
▶
◀
/
to position the cursor under the digit of the
symbol rate displayed to be set.
• Press
to enter the values of the symbol rate.
Configuring the CA module
• Press the
button
—> The “Configuring the CA module” – “MENU:”
menu is activated (chapter 5.4.1.3, page 33).
• Press the button.
—> The “Setting the input frequency” – “FREQ-IN:” menu
is activated.
Setting the input frequency
If three dots “ … “ appear in the second line of the display,
the cassette is in the “station search” mode. Please wait until
the process has finished.
Once the HF receiver has synchronised to the input signal,
any offset to the target frequency is displayed in MHz, e.g.
“– 1.8”.
If a question mark “?” appears in the second line of the dis-
play, there is no input signal present. Check the configuration
Bx 4A
SR= 27500
INPUT:
Bx 4A
Information
MENU 1/6
Module Hauptmenü
–> Information
Smartkarte
Jugendschutz
Einstellungen
Zurück
Bitte wählen Sie mit OK
AlphaCrypt Light 1.01 (c) Mascom GmbH
▶
◀
/
▶
◀
/
TV-Bild
TV picture
Bx 4A
Information
MENU 1/
6
M
o
d
u
l
e
H
au
p
tmen
ü
–
> Informatio
n
Smartkart
e
Jugendschut
z
Einstellunge
n
Zur
ü
ck
B
i
tte
w
ä
hl
e
n
S
i
e
mi
t
OK
AlphaCr
y
pt Li
g
ht 1.01
(
c
)
Mascom Gmb
H
▶
◀
/
T
V-Bil
d
TV picture