Filter
Top Products
- 33 -
- 33 -
Setting the audio mode
In this menu you can define whether the Mono, Stereo or
Dual Tone signal from the MPEG data stream or the VPS Sig-
naling (if available) is to be used.
• Press
to switch over the data stream
(“MPEG” / “VPS”).
• Press the button.
—> The “Setting the LNB oscillator frequency“ –
“LNB-FREQ:” menu is activated (page 21).
5.4.1.3 Configuring the CA module
This setting supports a menu, which is displayed on the tele-
vision screen. This menu is dependent on the CA module
used. Please observe the operating instructions of the CA
module used.
• Press
to select the menu item on the screen.
• Activate menu item with
▶
/
.
• Select the required function with the buttons.
• Save the settings with the
M
button.
—> To return to the “Setting the input symbol rate“ –
“INPUT:“ menu, press the button.
• Press the button.
—> The “Setting the input frequency” – “FREQ.-IN:”
menu is activated (page 22).
MPEG / VPS
Bx 4A
MPEG =>
AUDIO-OUT:
Audiomode
"
Bx 4A
SR= 27500
INPUT:
Bx 4A
Information
MENU 1/6
Module Hauptmenü
–> Information
Smartkarte
Jugendschutz
Einstellungen
Zurück
Bitte wählen Sie mit OK
AlphaCrypt Light 1.01 (c) Mascom GmbH
▶
◀
/
▶
◀
/
TV-Bild
TV picture
B
x
4A
SR= 2750
0
INPUT
:
▶
◀
/