Filter
Top Products
- 36 -
- 36 -
Switching on decoding / Setting the input symbol rate
The input symbol rate is not to be set if decoding is activated.
—> Setting the input symbol rate see page 22
.
• To switch on the decoding press the
button in the
”Setting the input symbol rate” menu.
—> The display shows “INPUT:” “CI at LINE A”.
The common interface of channel strip “A” is used for
the decoding.
• Press the button.
—>
The display shows “FREQ-IN: Data Tuner A” to indi-
cate that the input data of channel strip “A“ is used as
the output data for the modulator of channel strip “B”.
• Press the button.
—> Return to the main menu (”Channel selection” menu)
via connection F (page 24).
.
Bx 4B
f = 10600 MHz
LNB-FREQ:
Bx 4B
SR= 22000
INPUT:
▶
◀
/
▶
◀
/
* )
Bx 4B
CI at LINE A
INPUT:
Bx 4B
Data Tuner A
LNB-FREQ:
Bx 4B
f
= 10
6
0
0 MH
z
L
NB-FREQ
:
B
x
4
B
SR= 2200
0
INPUT
:
▶
◀
/
▶
◀
/
Bx 4B
Data Tuner
A
L
NB-FREQ
:
#
Bx 4B
Data Tuner A
FREQ-IN:
#
Bx 4A 01/10+
Das Erste
TV
Bx 4A
ARD
PROVIDER:
#