Hobart FT1000S-ER Dishwasher User Manual


  Open as PDF
of 44
 
– 33 –
Conveyor Offset Side Bar
Conveyor offset side bars are supplied for use with the standard conveyors and are
tobeused,ifnecessary,whenmakingthenalconnectiontojointhetwoconveyor
ends. The total length of all conveyor sections shipped may slightly exceed the
optimal length required for the machine’s length and conveyor’s travel. This can
possibly requireone ortwo rowsof ightlinks tobe removedtogether withall
associated rods, side bars and end rollers. When the proper length of conveyor has
been determined, pull the ends of the last two sections together to examine the side
bar patterns. If both sections end with the side bars on the outside position or both
sections end with the side bars on the inside position (Fig. 36), you must replace
the last side bars on one of the sections with the offset side bars to maintain the
pattern (Fig. 37). However, if the sections end such that the inside to outside pattern
of the side bars will be maintained, they can be joined without the use of the offset
side bars (Fig. 38). Complete the joining of the conveyor sections as necessary to
maintain the side bar pattern.
Fig. 36
Fig. 37
 previous next