Filter
Top Products
– 5 –
1. Remove the two shipping hinges from the side of the control box by removing
the two 5/16-18 bolts from each bracket.
2. While two people are securely supporting the main control box, remove the four
5/16-18 nuts, lock washers, and washers from the inside of the shipping braces
behind the control box.
3. Using at least two people, CAREFULLY withdraw the main control box’s rear
studs from the shipping braces. Lower the control box threaded studs to the
lower slots on the braces. Refasten the control box with the same 5/16-18 nuts,
lock washers, and washers removed in step 2.
4. Move the dishwasher past all low-height corridors or doorways.
5. Reverse steps 3, 2, and 1 to return the main control box to its original shipping
condition for proper installation.
DUAL RINSE
SECTION
SHIPPING
BRAC
E
SHIPPING
BRAC
E
CONTROL
BOX
SHIPPING
HINGE
SHIPPING
HINGE
Fig. 1