Filter
Top Products
– 18 –
Inspect Air Louvers
1. Check air louvers (shutters) (Fig. 9) inside
oven and tighten any loose screws.
2. Check oven interior, tighten or replace loose
or missing panel screws. Also check floor
anchors.
Fig. 9
Inspect Cavity Vent
1. Check vent for proper operation.
A. Push vent button (Fig. 10) on control panel to
open vent and then push again to close vent.
B. Visually check that vent opens (Fig. 11 and 12)
and closes when button is pressed.
Fig. 10
Fig. 11
Fig. 12
Visually Inspect Electrical Connections
1. Inspect all wiring connections for discoloration. If discoloration visible, contact your local Hobart
office for service.