Filter
Top Products
– 16 –
PROGRAMMING
MANAGER MODE PROGRAMMING
The LXe series warewasher’s microprocessor allows customization options for machine operation. To
activate or change these features, the programming edit mode must be entered.
The manager programming mode requires a MANAGER CODE to be entered to access the options
listed in the PARAMETERS MENU. The manager code is 1001.
PROGRAMMING INSTRUCTIONS
All customization is performed through the on-screen menu using the UP Arrow, MENU/DOWN Arrow,
and the ENT keys located on the keypad at the top of the machine (Fig. 4).
Fig. 4
MENU DISPLAY PROMPTS
The following prompts are used inside the menus:
• The UP arrow and MENU/DOWN arrow keys are used to change parameter values and to navigate
the menu.
• The ENT key is used to accept a value, to perform a specied action, or to enter a submenu.
• The text just to the right of the '>' symbol on the display screen shows what action or command
will occur if the ENT key is pressed.
WASHDISPLAYPOWER UP ARROW
MENU / DOWN ARROW ENTER
ADVANSYS BUTTON
(LXePR AND LXeR MODELS ONLY)