Filter
Top Products
– 22 –
Parameter
Name
Base
Models
(LXeC,
LXeH)
Advansys
Models
(LXePR,
LXeR)
Description
Possible
Values
Default
Value
Dirty Water
Indicator
✓
On Advansys machines, this setting
allows for a reminder for the operator
to be notied that 20, 40, or 60 cycles
have passed and a special water refresh
cycle is recommended. This cycle will
drain a portion of the wash water and
refresh it with fresh hot water.
Disabled,
20, 40, or 60
cycles
40 Cycles
Energy Saver
Mode
✓
On Advansys machines, this setting will
control when the machine will turn the
heaters off in order to save energy when
not in use.
Disabled, 1, 2,
or 3 hours
2 hours
Add Chemical
Alert
✓ ✓
Enables or disables an audible alert if
chemical is not being detected.
Disabled,
Visual, or
Audio and
Visual
Audio and
Visual
End Cycle
Audio Alert
✓ ✓
Enables or disables an audible alert at
the end of a cycle.
Disabled or
Enabled
Disabled
Language
✓ ✓
Sets the language on the display to
either English or French.
English (US)
or French
(Canada)
English (US)
Advansys
Button
✓
Choose function for Advansys button.
1. Not
programmed
2. Clean the
sump
3. One light
wash
4. One normal
wash
5. One heavy
wash
6. Run delime
cycle
7. Energy
saver
Not
Programmed
From
Factory
Exit Menu
✓ ✓
Press ENT to exit the Parameters Menu
and return to the Manager Menu. Any
settings that were changed are saved.