Filter
Top Products
– 21 –
PARAMETERS MENU TABLE
Parameter
Name
Base
Models
(LXeC,
LXeH)
Advansys
Models
(LXePR,
LXeR)
Description
Possible
Values
Default
Value
Detergent
Pump
✓ ✓
Enables or disables the detergent
pump.
Disabled or
Enabled
Enabled
Rinse Aid
Pump
✓ ✓
Enables or disables the rinse aid pump.
Disabled or
Enabled
Enabled
Wash Cycle
✓
Sets the cycle duration.
Light, Normal,
or Heavy
Normal
Low Temp
Alarms
LXeH
Only
LXeR Only
Enables or disables a visual alert on
the display that indicates that the Final
Rinse water temperature is below the
required minimum of 180°F (82°C).
When enabled, a message will display
notifying the user of this condition after
three consecutive cycles do not reach
the required nal rinse temperature.
However, machine operation will not
change and ware will continue to wash
as expected. After the temperature
increases past the minimum, the
message stops. When disabled, there
will be no extra message indicating a
low temperature event; however, the
temperature display will still show the
current Final Rinse water temperature.
Disabled or
Enabled
Disabled
Wash Arm
Alert
✓
Enables Visual Alert, Audio and Visual
Alert, or disables an alert that is dis-
played when the machine detects a
wash arm that is clogged or blocked
such that ware wash results could be
affected.
Disabled,
Visual, or
Audio and
Visual
Audio and
Visual
Delime
✓ ✓
Enables or disables the alert to delime
option.
Disabled or
Enabled
Enabled
Temperature
Units
✓ ✓
Sets the display units to either Fahren-
heit or Celcius.
Fahrenheit or
Celcius
Fahrenheit
Potable Rinse
LXePR
Only
On LXePR machines, this setting en-
ables or disables the PuriRinse option
that sprays fresh water after the saniti-
zation cycle to remove the sanitizer from
the ware.
Disabled or
Enabled
Enabled