– 19 –
Manager Mode
Programming Card
CHANGING PARAMETERS ENTER MANAGER SECURITY CODE: 1001
➜
MANAGER MENU
➜
➜
ENTER SECURITY CODE
➜
(for 1)
➜
(for 0)
➜
(for 0)
➜
(for 1)
Edit Parameters
CHANGING PARAMETERS IS REQUIRED TO CHANGE ALL CODES BELOW
CHEMICAL PUMP
enable or disable the detergent pump or rinse aid pump.
➜
until DETERGENT PUMP or RINSE AID PUMP
➜
➜
to enable or disable
➜
OR
➜
until EXIT MENU
➜
➜
until EXIT
➜
WASH CYCLE allows the customization of total run time.
➜
until CYCLE TIME
➜
➜
to choose Light cycle, Normal cycle, Heavy cycle,
➜
OR
➜
until EXIT MENU
➜
➜
until EXIT
➜
LOW TEMP ALARMS for hot machines only: (parameter) enables or disables alert indicating
that the final rinse temperature has been below the minimum temperature for a period of time.
➜
until LOW TEMP ALARMS
➜
➜
to enable or disable
➜
OR
➜
until EXIT MENU
➜
➜
until EXIT
➜
WASH ARM ALARM enables or disables an alarm that alerts the operator that the wash arms
may be clogged or blocked.
➜
until WASH ARM ALARM
➜
➜
to disable, Visual, or Audio & Visual
➜
OR
➜
until EXIT MENU
➜
➜
until EXIT
➜
DELIME enables or disables the delime reminder alert.
➜
until DELIME
➜
➜
to enable or disable
➜
OR
➜
until EXIT MENU
➜
➜
until EXIT
➜
TEMPERATURE UNITS allows the choice of Fahrenheit or Celsius.
➜
until TEMPERATURE UNITS
➜
➜
to choose Fahrenheit or Celsius
➜
OR
➜
until EXIT MENU
➜
➜
until EXIT
➜
POTABLE RINSE for cold machines only enables or disables the potable water rinse option.
➜
until POTABLE RINSE
➜
➜
to enable or disable
➜
OR
➜
until EXIT MENU
➜
➜
until EXIT
➜
UNDERCOUNTER