Filter
Top Products
– 4 –
Installation, Operation and Care of
LXe SERIES DISHWASHERS
SAVE THESE INSTRUCTIONS
GENERAL
The LXe Series dishwashers are fully automatic, front-loading dishwashing machines. The LXe series
machines are capable of doing 24 to 34 racks per hour, depending on model.
All LXe Series dishwashers shut down automatically 4 hours after last use to conserve energy.
All LXeH and LXeR dishwashers include Sense-A-Temp™ to insure proper hot water temperature
during rinse.
Standard equipment includes two 20" x 20" racks, electronic controls, drain pump, rinse pump, chemical
pumps, ll hose, and drain hose.
MODEL DESCRIPTION
LXeC, LXePR Fresh water rinse; low-temperature, chemical-sanitizing models for use
with 6% sodium hypochlorite solution (bleach) as the sanitizing agent*.
Note: If 8.40% bleach is to be used, contact Hobart Service or your
chemical supplier to change the sanitizer pump settings. (Charges may
apply)
LXeH Fresh water rinse with a built-in 70°F rise booster heater. This allows an
incoming water temperature of 110°F.
LXeR Fresh water rinse with an internal energy recovery unit and a built-in 70°F
rise booster heater. Recommended incoming water temperature 55°F to
80°F.
* - Sanitizing agent must be used in accordance with the EPA-registered label use instructions.