Filter
Top Products
20
2 Preparation
Coffee preparation starts. The preset amount of water flows
into the glass. Preparation stops automatically.
‘Please select
product:’
appears on the display.
To make sure the cappuccino frother always works properly, you
must rinse and clean it regularly (see Chapter 5 ‘Maintenance – Rins-
ing the cappuccino frother’).
Example:Proceed as follows to prepare milk foam.
Precondition:
‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam positionü.
E If you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk positionz.
T Press the
‘1 portion milk’ button.
The machine heats up.
‘1 portion milk’, the milk foam is prepared. Preparation stops
automatically when the preset amount of milk foam is
reached.
‘Please select product:’ appears on the display.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cap-
puccino frother’).
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee,
‘Not enough ground coffee’ is displayed and
the IMPRESSA stops the operation.
Warm milk and milk
foam
Ground coffee