Jura Capresso 13637 Coffeemaker User Manual


 
28
4 Permanent settings in programming mode
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’
T Press the ‘Amount of milk’ button.
T Press the
< or > button to change setting for the amount
of milk to
20sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Volume’ button.
T Press the
< or > button to change setting for the fill vol-
ume to
1.0oz’ (40ml).
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Interval’ button.
T Press the
< or > button to change setting for the interval
to
40sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Latte macchiato’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Product settings (2/6)’/ ‘One-off settings’ you
can make the following setting:
U
‘Active’
U
One-off settings can be made during preparation (e.g. coffee
strength or amount of water).
U
‘Inactive’
U
One-off settings cannot be made during preparation. The
product is prepared according to the settings in program-
ming mode (
‘Product settings (2/6)’ / ‘Expert mode’).
Example:Proceed as follows to disable one-off settings during prep-
aration.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
Enable or disable one-off
settings