Filter
Top Products
22
2 Preparation
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’ appears on the display.
E You can alter this setting at any time by repeating the above
procedure.
E You can also permanently set the amount for all specialty cof-
fees, hot water and milk in programming mode (see Chapter4
‘Permanent settings in programming mode – Product set-
tings’).
The following temperatures can be selected for preparing hot water:
‘Low’, ‘Normal’, ‘X high’.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
T Place a cup under the hot-water nozzle.
T Press the
‘Hot water’ button.
‘Hot water’ and the temperature are displayed.
E By pressing the
‘<’ or ‘>’ button several times (within approx-
imately 2 seconds) you can set the temperature to your indi-
vidual preference. This setting is not saved.
‘Hot water’, hot water flows into the cup. Preparation stops
automatically.
‘Please select product:’ appears on the display.
Hot water
J
CAUTION