Filter
Top Products
26
4 Permanent settings in programming mode
Program item Sub-item Explanation
‘Machine settings
(4/6)’
‘Save energy’
‘Switch off after’
‘Units’
‘Factory setting’
T Select an energy-saving mode.
T Set the time after which the IMPRESSA
should switch off automatically.
T Select the unit for the amount of water.
T Reset the permanently set values of all
products to the factory settings.
‘Machine settings (5/6)’ ‘Choose language’
‘Display’
‘Colour scheme’
T Select your language and the background
color for the display.
‘Information (6/6)’ ‘Product counter’
‘Maintenance counter’
‘Day counter’
‘Version’
T Keep track of all specialty coffees prepared
and view the number of maintenance
programs performed.
You can set your IMPRESSA such that programming mode is dis-
abled. When programming mode is disabled, it cannot be accessed
by pressing the P button.
Example:Proceed as follows to disable programming mode.
Precondition:
‘Please select product:’ is displayed.
T Remove the water tank.
‘Fill water tank’
T Press the Rotary Switch, the P button and the bottom right-
hand button simultaneously for about 2 seconds.
‘The machine is locked.’ is briefly displayed.
‘Fill water tank’
Programming mode is disabled.
To enable programming mode again, remove the water tank. Then
press the Rotary Switch, the P button and the bottom right-hand
button simultaneously for about 2 seconds.
‘The machine is
enabled.’
is briefly displayed. Programming mode is enabled again.
Enabling and disabling
programming mode