Filter
Top Products
32
4 Permanent settings in programming mode
T Press the ‘<’ or ‘>’ button to set the water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings (3/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Machine settings (4/6)’/ ‘Save energy’ you can
permanently set an energy-saving mode (Energy Save Mode,
E.S.M.
©
):
U
‘Active’
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
‘Energy Save’ is dis-
played.
U
Before you can prepare a specialty coffee, specialty coffee
with milk, or hot water, the machine must heat up.
U
‘Inactive’
U
All specialty coffees, specialty coffees with milk and hot
water can be prepared without having to wait.
Example:Proceed as follows to change the energy-saving mode
from
‘Active’ to ‘Inactive’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (4/6)’
is displayed.
T Press the
‘Save energy’ button.
‘Save energy’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (4/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
Energy-saving mode