Filter
Top Products
36
4 Permanent settings in programming mode
O T Press the P button to exit programming mode.
‘Please select product:’
E The selected background color only applies on the selection
page of the display showing the specialty coffees.
In the program item ‘Information (6/6)’ you can view the following
information.
U
‘Product counter’: Number of prepared coffee specialty cof-
fees, specialty coffees with milk and hot water
U
‘Maintenance counter’: Maintenance status and number of
maintenance programs performed (cleaning, descaling,
changing the filter)
U
‘Day counter’: Number of prepared coffee specialty coffees,
specialty coffees with milk and hot water. This counter can be
reset to zero.
U
‘Version’: Software version
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the program item ‘Information
(6/6)’
is displayed.
T Press the
‘Product counter’ button.
The number of specialty coffees prepared is displayed.
E You can also view the number of products prepared in the
product selector. To do this, turn the Rotary Switch.
T Press the
‘’ button.
‘Information (6/6)’
E To reset the day counter to zero, press the ‘Day counter’ but-
ton. Then press the
‘’ button and confirm by pressing ‘Yes’.
O T Press the P button to exit programming mode.
‘Please select product:’
Querying information