Filter
Top Products
46
5 Maintenance
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank’
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Please press the Rotary Switch.’
T Refit the cappuccino frother.
T Place a receptacle under the cappuccino frother, the coffee
spout and the hot-water nozzle.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows out of the hot-water
nozzle and the cappuccino frother.
‘Machine is heating.’, ‘Machine is rinsing.’, water flows out of
the coffee spout.
The operation stops automatically,
‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. Your IMPRESSA is once more
ready for use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition:
‘Fill bean container’ is displayed.
Q T Switch the machine off with the On/Off button.
3 T Switch the machine off at the power switch.
T Remove the aroma preservation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans and close the aroma
preservation cover.
Cleaning the bean
container