Filter
Top Products
34
4 Permanent settings in programming mode
In the program item ‘Machine settings (4/6)’/ ‘Factory setting’ you
can reset various settings to their factory settings:
U
‘Machine’
U
All user settings (apart from the ‘filter’ and ‘water hardness’)
are reset to factory settings. Your IMPRESSA then switches off.
U
‘Product’
U
The settings (amount of water, coffee strength, temperature
etc.) for any product can be reset individually to the factory
settings. The corresponding double product is also reset to
the factory settings at the same time.
U
‘All products’
U
The settings (amount of water, coffee strength, temperature
etc.) for all products are reset to the factory settings.
U
‘Display settings’
U
All display settings are reset to the factory settings.
Example:Proceed as follows to reset the values for
‘Espresso’ to the
factory settings.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the program item ‘Machine set-
tings (4/6)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the ‘Product’ button.
‘Product’
T Press the ‘Espresso’ button.
‘Espresso’ / ‘Reset this product to the factory setting?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘Machine’
O T Press the P button to exit programming mode.
‘Please select product:’
Restore factory settings