Filter
Top Products
CAREAND CLEANING
RemovableParts(cont.)
CLEANING MATERIALS
• Dishwashing detergent
. Warm water
° Scouring pad or soap-filled pad
RackGuide -.1_ IHI
Raised Back "_ fIf[
of the Rack __
TO REMOVE
1. Pull the racks out to the stop
position,,
2. Pull up the front of the rack and
slide under the bump of the rack
guide
TO CLEAN
Clean with warm water and detergent
For hard-to-remove stains, gently
scrub with a scouring pad or a
soap-filled pad Rinse well
TO REPLACE
I. Place the raised back of the rack
onto the rack guides,
2. Lift the front of the rack until the
raised back slides under the bump
of the rack guides.
3. Slide the rack all the way back
TO
1.
2_
REMOVE
Fully open the
door
Push the hinge
locks down
toward the
door frame, to
the unlocked
position,
This may
require a
flat-blade
screwdriver
Hinge Lock
(Unlocked
Position)
.
4_
5.
Hinge Arm
Firmly grasp both
sides of the door
at the top
Close door to
the door
removal position
Lift door up until
the hinge arm is I
clear of the slot,
Removal Position
TO REPLACE
.
2_
Firmly grasp both Bottom Hinge
sides of the door Edge of Arm
Slot
at the top,
With the door at
the same angle
as the removal
position, seat
the indentation
of the hinge arm
into the bottom
edge of the hinge
slot
Indentation
continued on next page
3O