KitchenAid KERS507 Range User Manual


 
27
U sing and Caring for Your Oven
ture settings. Auto Set saves you time by
limiting the number of pads you have to
press when cooking at a favorite setting.
DELAY
CLEAN
DEHYD
TIMED
LOCKED
ROTIS
START?
MIN
START STOP TIMER
SECMINHR
CLEAN
ON
DELAY
CLEAN
DEHYD
TIMED
LOCKED
ROTIS
START?
MIN
START STOP TIMER
SECMINHR
CLEAN
ON
DELAY
CLEAN
DEHYD
TIMED
LOCKED
ROTIS
START?
MIN
START STOP TIMER
SECMINHR
CLEAN
ON
Using auto set
Auto Set lets you choose from among ten
preset oven cooking cycles. These cycles
store commonly used cooking times,
cooking temperatures, and probe tempera-
1. Place food in cold oven.
If you need the Temperature Probe for
your cycle (settings 5-8), insert probe
into food. (Follow Steps 1-4 in “Using
the temperature probe” on page 24.)
2. Set Auto Set cycle.
PRESS
Press desired Number pad.
Example:
PRESS
(Use the “Auto set chart” on page 28
as your guide for selecting the correct
cycle.)
NOTES:
You can change the Auto Set
cycle any time before pressing the
Start/Enter pad by repeating Step 2.
3. Start oven.
PRESS
NOTE: Cycles 1-4, 9, 0: To see the time
when the Auto Set cycle will end, press
the Stop Time pad. Cycles 5-8: To see
the internal food temperature selected,
press the Temp Probe pad.
When the Auto Set cycle is done,
“End” and the time of day will show
in the display. Four tones will sound,
followed by one short tone every
minute, until you open the door, remove
the probe, or press the Cancel/Off pad.
YOU SEE
Example:
YOU SEE
The cooking setting, time, or probe
temperature will be displayed before you
press the Start/Enter pad.
Example
For Auto
Set 5:
YOU SEE
Example:
YOU SEE
AUTO
SET
1
START
ENTER
DELAY
CLEAN
DEHYD
TIMED
LOCKED
ROTIS
START?
MIN
START STOP TIMER
SECMINHR
CLEAN
ON