Filter
Top Products
Problem Possible cause and remedy
"Door not locked"
appears in the display.
The Pyrolytic cleaning programme door lock is not
locking.
^
Switch the oven off and then back on again.
Then restart the Pyrolytic cleaning programme.
If the fault code appears in the display again call the
Miele Service Department.
"Door not released"
appears in the display.
The door lock for the Pyrolytic cleaning programme is
not being released.
^
Switch the oven off and then back on again.
If the door lock still does not release itself call the Miele
Service Department.
The message "No signal
to food probe.
Reposition food probe
in the oven" appears in
the display.
The food probe is no longer recognised by the oven.
^ Reposition the food probe in the food.
If the oven still does not recognise the food probe it
must be faulty.
A replacement food probe can be ordered from Miele
or from your Miele dealer.
The message "Function
currently not available"
appears in the display
after selecting the
"Descale" function.
The steam injection system is faulty.
^ Call the Miele Service Department.
Problem solving guide
135