Setting the temperature
^
Set the required temperature.
^
Touch "OK".
Set the number of bursts of steam
If you wish the burst of steam to be
injected into the oven automatically
after the heating-up phase:
^
Touch Automatic burst of steam
If you wish to inject one or more bursts
of steam manually at specific times:
^
Touch "1 burst of steam", "2 bursts of
steam" or "3 bursts of steam".
When to add the steam
This option will only appear in the
display after you have selected 1, 2
or 3 bursts of steam.
Tip: If you have selected more than one
burst of steam, the 2nd one should be
released at least 10 minutes after
starting the programme.
–
Manual steam
If you want to inject the bursts of steam
manually:
^ Touch "Manual steam".
Then set the minute minder N to
remind you when to release them.
– Time-controlled steam
If you want to time when to release the
bursts of steam:
^ Touch "Time-controlled steam".
^ Set the time for each burst of steam.
The oven will then release the steam
at the specified times. The time
counts down as soon as the
programme is started.
^
Touch "OK".
The prompt to draw in water then
appears.
Moisture plus d
69