Filter
Top Products
Problem Possible cause and remedy
The oven does not heat
up.
^
Check whether the demo mode has been activated
(see "Settings - Showroom programme").
If demo mode has been switched on the oven can be
operated but it will not heat up.
^
Deactivate demo mode.
"Power cut - Process
cancelled" appears in
the display.
There has been a power cut which has caused a
current process to stop.
^
Switch the oven off and then back on again.
Start the cooking programme again.
12:00 appears in the
display.
The power supply was interrupted for longer than 200
hours.
^ Reset the time and date.
The message
"Maximum operating
duration reached"
appears unexpectedly
in the display.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Touch the OK sensor. Touch # to clear the message
"Process finished" from the display. The oven can
then be used again as normal.
"Fault: F 32" appears in
the display.
The Pyrolytic cleaning programme door lock is not
locking.
^
Switch the oven off and then back on again.
Then restart the Pyrolytic cleaning programme.
If the fault code appears in the display again call the
Miele Service Department.
Problem solving guide
117