Filter
Top Products
^
Take the lid off and fill the container with cold,
clean drinking water up to a maximum of 2 cm
below the top.
A valve in the base of the container will ensure
that no water can escape.
^
Replace the lid making sure that the small handle
faces towards the front and then push the
container all the way back into the machine.
The container should now be sitting flat on the
floor of the machine to ensure the valve is sealed.
If the water container does not sit flat on the floor,
check whether the surface that the water
container sits on is dirty and clean it if necessary.
Filling the water and coffee bean containers
28