Filter
Top Products
All electrical work should be carried out by a
suitably qualified and competent person only, in
strict accordance with national and local safety
regulations.
Installation, repairs and other work by unqualified
persons could be dangerous. The manufacturer
cannot be held liable for unauthorised work.
Ensure power is not supplied to the appliance until
after installation work has been carried out.
The voltage and connected load are given on the
data plate. Please ensure these match the
household mains supply. The fuse rating is quoted
on the plug.
The appliance is supplied with a mains cable with
moulded plug for connection to a 230 - 240 V mains
supply.
Connection should be made via a fused plug and
suitable switched socket which is easily accessible
after installation.
Do not connect via an extension lead.
For extra safety it is advisable to install a residual
current device (RCD), with a trip current of 30 mA (in
accordance with DIN VDE 0664, VDE 0100, Section
739).
If the socket is not accessible after installation
(depending on country) an additional means of
disconnection must be provided for all poles.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Electrical connection U.K., ZA, IRL
69