Filter
Top Products
The following will appear in the display:
The machine must now be rinsed out to remove all
traces of the descaling agent.
^
Rinse the water conainer out thoroughly and then
fill it with at least 2 litres of fresh, cold water and
place it back in the machine.
^
Place good sized empty containers under the hot
water spout and steam spout and turn the steam
control dial anti-clockwise.
^
Allow all the water to empty out of the machine via
the spouts.
This rinses through the whole system and removes
all traces of descaling agent.
When the water container is empty, the following will
appear in the display:
^ Turn the steam control dial clockwise back to the
o position and press
ENTER.
^
If the selector is in the programming position, the
following will appear in the display window:
The machine has been descaled and
rinsed clean of any descaling agent.
^
Lubricate around the outer seal at the bottom of
the water container (see illustration) and also the
contact in the machine using the silicone lubricant
supplied.
Descaling
60