Filter
Top Products
Repairs to electrical machines should only be
carried out by a suitably qualified and competent
person in accordance with local and national
safety regulations. Repairs and other work by
unqualified persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
Various messages will appear in the display to warn
of certain problems. The section “Display
messages” explains how to respond to these.
The following problems will not be indicated in the
display, but can be dealt with as follows:
What to do if ... . .
. . . no message appears in the display.
The machine is not connected to the electricity
supply.
^ Is the machine front closed properly?
^ Check that the fuse is not defective and that the
mains fuse has not blown. If it has, consult the
Miele Service department.
. . . the lighting does not come on when the
selector is turned to “In Operation with lighting”
or “Lighting”.
^
Is the front of the machine open?
^
Is the machine in standby mode?
^
Is the machine locked?
If not, the fluorescent lamp is faulty. To replace it with
a new one:
Problem solving
62